Setting up the emulated hardware

• Using the Cheetah SpecDrum
  • About the Cheetah SpecDrum
  • Enable or disable SpecDrum emulation
• Using the Covox sound system
  • About the Covox sound system
  • Enable or disable Covox emulation
• Using the Currah µSpeech
  • About the Currah µSpeech
  • Enable or disable µSpeech emulation
  • Currah µSpeech Programming Manual
    • Contents
    • 1. Setting up the CURRAH MicroSpeech
    • 2. Simple words and phrases
    • 3. The allophone set
    • 4. Intonation and "Phrase Libraries"
    • 5. The Speech buffer - using CLEAR"
    • 6. Using machine code with the unit"
    • Appendix I - Decimal and hex codes for the allophones"
    • Appendix II - Tape recorder/Hi-Fi output"
    • Appendix III - LOAD, SAVE and BEEP"
    • Appendix IV - Using the unit with the Sinclair ZX Microdrive
    • Appendix V - Games software on the MicroSpeech"
    • Appendix VI - Your television picture"
• Using the Fuller Box
  • About the Fuller Box
  • Enable or disable Fuller Box emulation
• General Sound emulation
  • About General Sound
  • Enable or disable General Sound emulation
• Using the MGT/Datel Plus D
  • About the MGT/Datel Plus D
  • Getting started
  • Create a new (blank) disk image
  • Format a disk image
  • Open a disk image
  • Eject a disk image
  • Write protect or write enable a disk image
  • Change the number of drives connected
  • Setup printer emulation
  • Use the Plus D snapshot button
  • Using real Plus D floppy disks
    • About real floppy disk support
    • Enable real disk support
    • Backup a floppy disk to a disk image
    • Write a disk image to a floppy disk
  • Using the Disk Wizard
    • About the Disk Wizard
• Using the Multiface
  • About the Multiface
  • Activate the Multiface
  • Make the Multiface invisible to other programs
  • Clear the Multiface's memory
  • Enable or disable writes to the Multiface ROM
• Configuring parallel and serial communications
  • About parallel and serial communications
  • Redirect Centronics (parallel) port output to a parallel or serial port
  • Redirect Centronics (parallel) port output to the Windows clipboard
  • Redirect Centronics (parallel) port output to a file
  • Redirect RS-232 serial port output to a parallel or serial port
  • Redirect RS-232 serial port output to the Windows clipboard
  • Redirect RS-232 serial port output to a file
• Using the ZX Interface 1 and ZX Microdrives
  • About the ZX Interface 1 and ZX Microdrive
  • Create a new virtual Microdrive cartridge
  • Open a Microdrive cartridge file
  • Eject a Microdrive cartridge
  • Write protect or write enable a cartridge
  • Change the number of emulated drives
  • Using the RS-232 serial port
    • About the RS-232 serial port
    • Build a serial cable
    • Redirect serial port output to a file
    • Take serial port input from a file
    • Use a real serial (COM) port
    • Set the baud rate
    • Serial port buffering problems
    • Serial port errors
• Working with ZX Interface II ROM cartridges
  • About Interface II ROM cartridges
  • Open an Interface II ROM cartridge
• Using the ZX Printer
  • About the ZX Printer
  • Enable or disable ZX Printer emulation
  • Copy output to the clipboard
  • Save output to disk
  • Send the output to a real printer